Lindorm, Inc.
Lindorm, Inc.
Contact
"Sedimeter sensors designed and
built by Lindorm are a fantastic
tool for measuring water column
turbidity and siltation." (Gravity)

Preparing the SM3B for deployment

The cleaning shuttle has to be positioned at the top of the sensor, near the motor house, for the cleaning operation to be carried out correctly. If it is placed too low, the instrument will report an error at the end of the first cleaning, and will then turn off any further cleanings.

Tech Notes

Newest First

2014-10-26: Sediment Spill Monitoring

2014-10-02: Preparing the SM3B for deployment

2011-08-19: Memory Cards


Disclaimer - This information is given in good faith but without any warranty regarding the applicability for any specific situation. For consulting see Services.